Industrial Computed Tomography MCQs with answers: Following Multiple Choice Questions (MCQs) are based on “Industrial Computed Tomography” also known as “Industrial Computerized Tomography ”.
Topics: Need and importance of Industrial Computed Tomography (ICT), Types of scanners used in ICT, Advantages, Disadvantages and Limitations of ICT scan.
It is related with the subject Instrumentation or Industrial Measurement and Applications. This topic is mostly beneficial in the field of Instrumentation, Electronics, Computer and Mechanical Engineering.
These MCQs will be useful in various competitive examinations, entrance examinations, oral examination (Viva voce), certifications and interviews.
MCQ on Industrial Computed Tomography
Que.1 CT Scan stand for__________.
- Computed Tomography Scan
- Computerized Topography Scan
- Coloured Topography Scan
- Computer Tomography Scan
✔ View Answer
Option 1: Computed Tomography Scan
Que.2 Which among the following are used in Computed tomography (CT) Scan?
- X-Rays
- Radio Waves
- Ultrasound
- Infrared waves
✔ View Answer
Option 1: X-Rays
Que.3 Computed tomography is identified as
- Reflection tomography
- Emission tomography
- Volumetric tomography
- Transmission tomography
✔ View Answer
Option 4: Transmission tomography
Que.4 When compared to projection radiography, conventional tomography shows
- Better spatial resolution
- Improved contrast resolution
- Relaxed quality control
- Less operator involvement
✔ View Answer
Option 2: Improved contrast resolution
Que.5 Some of the key uses for industrial computed tomography scanning are
i. flaw detection
ii. reverse engineering
iii. failure investigation
- Only (i) and (ii) are correct
- Only (ii) and (iii) are correct
- All are correct
- Only (i) and (iii) are correct
✔ View Answer
Option 3: All are correct
Que.6 Industrial CT scan not used for
- Assembly analysis
- Material analysis
- Void, cracks and defect detection
- None of the above
✔ View Answer
Option 4: None of the above
ExplanationIndustrial CT scan typically used for
1. Assembly analysis
2. Material analysis
3. Void, cracks and defect detection
4. Failure analysis
5. Internal and external dimensions measurements
6. Non-destructive testing
7. Quality Inspection of parts
Que.7 Which of the following need flat panel X-ray detector?
- Line beam scanner
- Cone beam scanner
- Both (1) and (2)
- None of the above
✔ View Answer
Option 2: Cone beam scanner
Que.8 X-ray line detector used in _____.
- fan beam scanner
- Cone beam scanner
- Both (1) and (2)
- None of the above
✔ View Answer
Option 1: fan beam scanner
Que.9 Identify the correct statement/s.
i. CT scanning cannot provide views inside components in their functioning position, without disassembly.
ii. CT scanning can detect internal features and defects displaying this information in 3D without destroying the object.
- Only statement (i) is correct.
- Only statement (ii) is correct.
- Both statements are correct.
- Both statements are wrong.
✔ View Answer
Option 2: Only statement (ii) is correct.
Que.10 _______for industrial CT scanning allow measurements even of hidden part.
- Software programs
- Flat panel X-ray detector
- Cone beam X-ray source
- X-ray line detector
✔ View Answer
Option 1: Software programs
Explanation: Some software programs for industrial CT scanning allow measurements even of hidden part.The ability of CT scanning to provide very accurate measurements of a part is used for research and development.
Que.11 Which of the following is not an advantage of ICT?
- The internal structure of the object can be obtained without destroying it.
- It is compatible with all shapes and sizes.
- Quick analysis of object materials with higher density is possible.
- Extremely accurate internal dimensions are obtained.
✔ View Answer
Option 3: Quick analysis of object materials with higher density is possible.
Que.12 Which of the following is not a disadvantage of ICT?
- Expert handling is necessary to handle CT scan and to remove noise.
- Comparison with the reference model is not possible.
- The radiation from CT scanning may harm to machine operators.
- A potential drawback with CT imaging is the possibility of artifacts in the data.
✔ View Answer
Option 2: Comparison with the reference model is not possible.
Explanation: Read the tutorial on ICT for advantages and disadvantages in details. Link is given at the end.Que.13 ______ is a potential drawback with CT imaging.
- The possibility of artifacts in the data
- Measurement of voids
- Inability to measure thickness of wall
- Inability to detect cracks in plastic
✔ View Answer
Option 1: The possibility of artifacts in the data
Explanation:Disadvantages of ICT
1. Expert handling is necessary to handle CT scan and to remove noise.
2. X-rays take longer to pass through materials with higher density therefore the CT scan will take more time to complete.
3. The radiation from CT scanning may harm to machine operators.
4. A potential drawback with CT imaging is the possibility of artifacts in the data. An artifact is anything in the image that does not accurately reflect the true geometry in the part being inspected.
Que.14 The CT scan is very useful, in reverse engineering
- when a manufactured object is available but design of the object is not available.
- if a manufactured part is available, but not the original prints or design data.
- When the object available is very expensive so as to destroy.
- All of the above.
✔ View Answer
Option 4: All of the above.
Explanation:Sometimes is a process in which manufactured products are deconstructed to extract design information from them. Often, reverse engineering involves deconstructing individual components of larger products. Reverse engineering process enables you to determine how a part was designed so that it can be recreated.
The CT scan is very useful, when a manufactured object is available but design of the object is not available.
Using CT scanning an existing part or object is measured and then an exact copy of that object is created.
This technology is extremely useful, when a manufactured part or object is available, but not the original prints or design data.
Que.15 Industrial CT scan is a non-contact measurement method.
- True
- False
✔ View Answer
Option 1: True
If you have any query about Industrial Computed Tomography MCQs with Answers, feel free to comment.
To read complete article on Industrial Computed Tomography (ICT)
To the electronicsforyou.in webmaster, Your posts are always well-cited and reliable.